BETA-CAE Systems 24.1.3 | 1.9 Gb
BETA is now part of Cadence announces the release of the 24.1.3 of its software suite. For those of you still working with 24.1.x series, this is an excellent opportunity to make the most of this brand-new release, as it comes to enrich prior versions with critical bug fixes and accelerated performance, along with selected implementations.
What's new in BETA CAE Systems 24.1.3
Known issues resolved in ANSA
CAD Import/Export
- ANSA would report a TRANSL_DISTORTION_ANGLE value of 5.[degrees] as not valid, even though the Translators Distortion angle value of 5 was successfully applied from the GUI and translators.defaults were successfully saved.
GUI
- The Global Scaling would be erroneous for Linux with KDE desktop manager.
Model Browser
- The Change Representation to Lumped Mass would cause the miscalculation of Mass value. Moreover, when deleting a configuration, the parts that belong solely to this configuration would be deleted.
Connections and Assembly
- Focusing on Seamwelds > OVERLAP-SHELL-CLOSED FE Representation, the user-specified width angle would not be taken into consideration during the realization of the FE Representation.
TOPO
- The “Curves > Create” function would not snap on nodes, with the Grids flag activated and the Wire flag deactivated.
Shell Mesh
- The “Auto paste” option from the “Project” function would not work as expected.
- Consequently, the “Paste” option, is now available and appears when the Target is set to Shells and pastes source to target entities regardless of their distance; whereas the “Auto paste” option, appears when Target is set to Faces and pastes source to target entities only under the CONS matching distance.
Volume Mesh
- An abrupt termination could occur during volume auto-detection when a laminate material was used for the volume faces.
- Focusing on Mesh Parameters Wizard, when creating quality criteria for the Solid Tria mesh type, relevant criteria for the shell mesh would not be created.
Batch Meshing
- Considerable quality improvements in CFD anisotropic mesh with zones from sharp edges have taken place in v24.1.3.
DECKs
- ANSA would terminate unexpectedly during execution of “Checks>Dependency NASTRAN>Fix Chain” when “Flip Results” button was selected many sequential times.
- Moreover, ANSA would not read correctly the thickness information during the Thickness input.
Known issues resolved in EPILYSIS
General
Abrupt abortion would occur in cases where the ids of the model was above 1.000.000.000. A new grid ID upper limit has been set at 2.047.483.646.
Known issues resolved in META
GUI
- Zooming in/out the model via mouse wheel will no longer affect workspace's vertical scrollbar.
- Furthermore, META was not following the OS scale factor in Linux with KDE desktop environment.
General
- Several cases of unexpected termination have been combatted in v24.1.3.
For instance:
- Script editor window would unexpectedly close after performing "Save All" operation on files.
- Saving GUI settings would also result in a sudden abortion of META.
Read Results
- Stresses from UNV55 were not read correctly.
- ParaView results from 2D VTK files would not be read at all.
- Focusing on Abaqus, when applying the cyclic symmetry on an analysis with multiple steps, the displacement results were not calculated properly.
- Referring to LS-DYNA, geometry with encrypted includes, written in I10 format. was not read properly.
Pam-Crash
- META would unexpectedly terminate when reading part data from ERFH5 file.
Fringebar
- Abrupt META abortion could occur when adding an extra color in fringe bar.
Annotations
- An unexpected termination could occur when deleting an annotation that had the "hide shadowed" option enabled.
Managing Curve Data
- ISO Header attributes were not updated after curve modifications.
- Filtered results (curves) were not read correctly from TDMS files.
NVH Calculators
- Referencing FRF Assembly, when creating a new Node Set response, META would erroneously assign the Original coordinate system, instead of the Global one.
- Focusing on Modal Response, unexpected termination would occur due to excessive memory requirements when reading .pch files with Modal Displacements in Transient Response, in case of sort2 format, with many timesteps.
File Export
- Complex Stress tensor components in GCS, calculated by Modal Response, were not output correctly in UNV format.
Known issues resolved in KOMVOS
Data Management
- Saved filters would not appear under the filter drop-down menu.
- From now on, all saved filters which are accessible to the user, are listed and sorted by “DM Modification Date”.
Process Management
- Variables of Node Instances would not be displayed in Details tab, when their value was empty.
Machine Learning
- DV-based ML Training would unexpectedly terminate if more than 200 experiments were provided.
Known issues resolved in FATIQ
GUI
- When importing files with sets, unnecessary messages were printed in the FATIQ notification panel.
Materials
- User-defined materials were not displayed on the list when loading multiple tasks.
CAD Import/Export
- ANSA would report a TRANSL_DISTORTION_ANGLE value of 5.[degrees] as not valid, even though the Translators Distortion angle value of 5 was successfully applied from the GUI and translators.defaults were successfully saved.
GUI
- The Global Scaling would be erroneous for Linux with KDE desktop manager.
Model Browser
- The Change Representation to Lumped Mass would cause the miscalculation of Mass value. Moreover, when deleting a configuration, the parts that belong solely to this configuration would be deleted.
Connections and Assembly
- Focusing on Seamwelds > OVERLAP-SHELL-CLOSED FE Representation, the user-specified width angle would not be taken into consideration during the realization of the FE Representation.
TOPO
- The “Curves > Create” function would not snap on nodes, with the Grids flag activated and the Wire flag deactivated.
Shell Mesh
- The “Auto paste” option from the “Project” function would not work as expected.
- Consequently, the “Paste” option, is now available and appears when the Target is set to Shells and pastes source to target entities regardless of their distance; whereas the “Auto paste” option, appears when Target is set to Faces and pastes source to target entities only under the CONS matching distance.
Volume Mesh
- An abrupt termination could occur during volume auto-detection when a laminate material was used for the volume faces.
- Focusing on Mesh Parameters Wizard, when creating quality criteria for the Solid Tria mesh type, relevant criteria for the shell mesh would not be created.
Batch Meshing
- Considerable quality improvements in CFD anisotropic mesh with zones from sharp edges have taken place in v24.1.3.
DECKs
- ANSA would terminate unexpectedly during execution of “Checks>Dependency NASTRAN>Fix Chain” when “Flip Results” button was selected many sequential times.
- Moreover, ANSA would not read correctly the thickness information during the Thickness input.
Known issues resolved in EPILYSIS
General
Abrupt abortion would occur in cases where the ids of the model was above 1.000.000.000. A new grid ID upper limit has been set at 2.047.483.646.
Known issues resolved in META
GUI
- Zooming in/out the model via mouse wheel will no longer affect workspace's vertical scrollbar.
- Furthermore, META was not following the OS scale factor in Linux with KDE desktop environment.
General
- Several cases of unexpected termination have been combatted in v24.1.3.
For instance:
- Script editor window would unexpectedly close after performing "Save All" operation on files.
- Saving GUI settings would also result in a sudden abortion of META.
Read Results
- Stresses from UNV55 were not read correctly.
- ParaView results from 2D VTK files would not be read at all.
- Focusing on Abaqus, when applying the cyclic symmetry on an analysis with multiple steps, the displacement results were not calculated properly.
- Referring to LS-DYNA, geometry with encrypted includes, written in I10 format. was not read properly.
Pam-Crash
- META would unexpectedly terminate when reading part data from ERFH5 file.
Fringebar
- Abrupt META abortion could occur when adding an extra color in fringe bar.
Annotations
- An unexpected termination could occur when deleting an annotation that had the "hide shadowed" option enabled.
Managing Curve Data
- ISO Header attributes were not updated after curve modifications.
- Filtered results (curves) were not read correctly from TDMS files.
NVH Calculators
- Referencing FRF Assembly, when creating a new Node Set response, META would erroneously assign the Original coordinate system, instead of the Global one.
- Focusing on Modal Response, unexpected termination would occur due to excessive memory requirements when reading .pch files with Modal Displacements in Transient Response, in case of sort2 format, with many timesteps.
File Export
- Complex Stress tensor components in GCS, calculated by Modal Response, were not output correctly in UNV format.
Known issues resolved in KOMVOS
Data Management
- Saved filters would not appear under the filter drop-down menu.
- From now on, all saved filters which are accessible to the user, are listed and sorted by “DM Modification Date”.
Process Management
- Variables of Node Instances would not be displayed in Details tab, when their value was empty.
Machine Learning
- DV-based ML Training would unexpectedly terminate if more than 200 experiments were provided.
Known issues resolved in FATIQ
GUI
- When importing files with sets, unnecessary messages were printed in the FATIQ notification panel.
Materials
- User-defined materials were not displayed on the list when loading multiple tasks.
BETA CAE Systems is an engineering software company committed to the development of best-in-class CAE software systems that meet the requirements of all simulation disciplines. Amongst the company’s products, the ANSA pre-processor and the µETA post-processor, hold a worldwide leading position, in many sectors, including the automotive, railway vehicles, aerospace, motorsports, chemical processes engineering, energy, electronics, heavy machinery, power tools, and biomedical.
ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the required functionality for full-model build up, from CAD data to ready-to-run solver input file, in a single integrated environment. ANSA is the users' preference due to its wide range of features and tools that meet their needs. The list of productive and versatile features is long and the alternative tasks and processes to be completed using them are countless.
META is a thriving multi-purpose post-processor that meets the diverce needs of various CAE disciplines for processing solver results until a complete reporting. It owes its success to its impressive performance, innovative features and capabilities of interaction between animations, plots, videos, reports and other objects. Offered in a package with ANSA or as a single product, META with its high performance and level of automation and customization, eliminates the need for use of any other post processing tool.
Porting product data and meta-data from diverse CAD systems to CAE pre-processing is a challenging task that requires advanced and configurable tools. The CAD data to ANSA translators meet the industries requirements by offering a wide portfolio of supported CAD formats, settings and options. Offered with ANSA or as add-on to it, the translators, allow the trouble-free kick off of the CAE processing.
BETA CAE Systems Solutions for Biomechanics
Watch this video and find out how BETA CAE Systems software products will help you streamline your Biomechanics simulations.
Cadence is a pivotal leader in electronic systems design, building upon more than 30 years of computational software expertise. For 10 years in a row, Fortune magazine has named Cadence one of the 100 Best Companies to Work For.
Cadence Design Systems, Inc. announced it has completed its previously announced acquisition of BETA CAE Systems International AG, a leading provider of multi-domain, engineering simulation solutions. BETA CAE accelerates Cadence’s Intelligent System Design strategy by expanding its multiphysics system analysis suite with highly complementary products, enabling Cadence to offer a more comprehensive portfolio to its customers. BETA CAE has a very strong footprint in the automotive vertical sector and at leading companies in the aerospace, industrial and healthcare industries.
Owner: BETA CAE Systems Inc.
Product Name: BETA CAE Simulation Solutions
Version: 24.1.3
Supported Architectures: x64
Website Home Page : www.beta-cae.com
Languages Supported: english
System Requirements: Windows *
Size: 1.9 Gb
Compatibility and Supported Platforms
- ANSA files saved by all the first and second point releases of a major version are compatible to each other. New major versions can read files saved by previous ones but not vice versa.
- META Project files saved from version 24.1.3 are compatible and can be opened by META version 16.0.0 or later.
- Support for Mac OS has been discontinued.
- Support for 32-bit platforms has been discontinued for all operating systems.
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please